Damp Proofing

Stormseal the breathable brick & masonry water-seal you CAN apply in damp conditions. Unlike conventional surface damp treatments, Stormseal doesn’t rely on dry weather for successful application. Effectively seal damp external walls, even in winter.

Extreme Climate is the ultimate high-performance brick sealer and masonry water seal for harsh environments. This professional-grade brickwork sealer is applied in just ONE COAT and provides 100% breathable surface protection for damp brick walls, sandstone, limestone, granite and more. As the UK's leading wall sealer, it uses the latest hydrophobic technology to offer unparalleled performance and versatility even in the most exposed locations.

A professional, light weight, solvent resistant sprayer, ideal for small scale timber treatment, including small lofts. Compatible with Kingfisher aqueous products including KF-8 range and KF-18.

The Total 7 Litre Sprayer is a professional, light weight & solvent resistant, ideal for small scale timber treatment, including small lofts. Compatible with Kingfisher aqueous products including KF-8 range and KF-18.

Terrain TM3 Mesh Membrane is a water resistant membrane with studs forming a regular pattern on one face of the roll, and polypropylene mesh on the other side. It is tough but pliable and can be easily cut with a sharp blade to the correct size. Suitable for use above and below ground and can be rendered, plastered or dot and dab boarded on top.

Terrain Mesh Membrane is a water resistant membrane with studs forming a regular pattern on one face of the roll, and polypropylene mesh on the other side. It is tough but pliable and can be easily cut with a sharp blade to the correct size. Suitable for use above and below ground and can be rendered, plastered or dot and dab boarded on top.

Terrain TM3 Membrane is a high performance waterproofing membrane with a 3 mm stud, to prevent the penetration of water through walls and floors. This can be used as part of a Type C Cavity Drain Membrane Waterproofing System.

Terrain Plaster Plugs are used for the application of Kingfisher Mesh membrane Systems.

Terrain Plaster Plugs with seals are used for the application of Kingfisher Mesh membrane Systems.

Terrain Brick Plugs are 60 mm fixings to use when applying membrane systems to walls.

Terrain Fibre Tape is used to join waterproof plaster membranes together, and enable direct plaster or dot-and-dab application on top.

Terrain Corner Strip Tape is used to seal membranes at walls and floors and to fix perimeter drainage channels in place.

Terrain 50mm Outlet to take water from the waterguard

The Terrain Waterguard Connector Piece is a push fit joint section that allows all channel sections to connect together to form a seamless passage for water to flow and also helps inhibit lime build up. This also helps reduce movement at jointing sections.

The Terrain Extended Jetting Eye has been designed to allow cleaning and inspection of the channel system waterguard or floor drain.

Flaking paint, peeling wallpaper and crumbling plaster are just a few of the many symptoms which can originate from rising damp in buildings. Dri-wall DPC injection cream is the quick and versatile solution to effectively bring damp walls under control.

Where traditional pressure injection fluid cannot be used, Dri-Wall is the answer. An advanced, ready-to-use, chemical damp proofing formula which forms an effective moisture barrier within the wall.

Where traditional pressure injection fluid cannot be used, Dri-Wall DPC Injection Kit is the answer. An advanced, ready-to-use, chemical damp proofing formula which forms an effective moisture barrier within the wall.

The Dri-Wall applicator gun is a premium grade and highly durable applicator, designed specifically for this cartridge size. Makes the installation of Dri-Wall damp proofing injection cream easy.

Professional applicator nozzles allow Dri-Wall to be injected into brick walls up to 9" (230mm) from one side (18" from both sides).

Widely respected and utilised by thousands of remedial contractors, Kingfisher Enviroject injection fluid is simply the highest quality chemical damp proofing available.

Premium Damp Proof Paint: Waterproof Barrier for Interior & Exterior Walls

Kingfisher Damp Proof Paint (now available in NEW Black). It creates a powerful waterproof barrier on concrete, brick, render, and other surfaces. This quick-drying, damp-proof membrane forms an effective liquid DPM that prevents water ingress and protects against damp problems. Our premium waterproof paint provides long-lasting protection for interior and exterior walls.

A high performance epoxy resin primer, ideal for sealing concrete surfaces. May be blended with quartz sand (while tacky) to create an anti-slip surface finish. Kingfisher clear epoxy resin for concrete floors can also form a moisture proof membrane.

Damp concrete floor? The solution may be easier than you think! Where standard damp proof paints and sealers fail, our permanent Damp Floor Epoxy Kit delivers a dependable damp proof flooring membrane in as little as 2mm thickness.

An absolutely essential component of the Kingfisher tanking system, Anti-Sulphate (Ground Salt Neutraliser) must be applied wherever ground water has penetrated. This is because ground water contains sulphates and chlorides which degrade Tanking materials.

Kingfisher K-X11 Waterproof Admixture is a copolymer blend of latex and acrylics. This waterproofing admixture for mortar dramatically improves the characteristics of the mix, providing water resistance, adhesion, strength and flexibility to both renders and screeds.

Primarily used to seal wall to floor joints as an integral part of our Tanking system. Barrier mortar is easy to use and highly effective.

Only use genuine "Limelite renovating plaster" following chemical injection treatment for rising damp. Our salt retardant plaster beats standard "off-the-shelf" browning plasters because they cannot cope with the drying out process and frequently fail.

An absolutely essential component of the Kingfisher tanking system, Anti-Sulphate (Ground Salt Neutraliser) must be applied wherever ground water has penetrated. This is because ground water contains sulphates and chlorides which degrade Tanking materials.

Kingfisher Rendermix is formulated specifically for rendering after the DPC injection process. Incorporating a powerful fungicide, this waterproof cement additive stops further damaging fungal growth.