Damp Proofing

A new professional grade DPC (damp proof course) injection cream in a tube! No specialist injection equipment required, our DPC cream injection has been developed for ease of use and convenience.

Where traditional pressure injection fluid cannot be used, Dri-Wall DPC Injection Kit is the answer. An advanced, ready-to-use, chemical damp proofing formula which forms an effective moisture barrier within the wall.

Where traditional pressure injection fluid cannot be used, Dri-Wall is the answer. An advanced, ready-to-use, chemical damp proofing formula which forms an effective moisture barrier within the wall.

The Dri-Wall applicator gun is a premium grade and highly durable applicator, designed specifically for this cartridge size. Makes the installation of Dri-Wall damp proofing injection cream easy.

Professional applicator nozzles allow Dri-Wall to be injected into brick walls up to 9" (230mm) from one side (18" from both sides).

The Kingfisher injection pump is specially designed and built for injection of damp proofing creams and fluids and incorporates many features not found on lesser pumps.

This Spray lance and hose is developed for use in conjunction with the injection pump. Use to apply timber preservatives, water repellents or masonry biocides.

The new 7250 Damp Meter from ETI is compact and features an easy-to-read, digital display with a 20-LED bar graph. This Damp detector for timber, plaster and mortars is designed specifically for building professionals and trade.

Designed specifically for the construction industry and based around the 7000 moisture meter, this Moisture Meter Kit is a complete solution for measuring the moisture and dampness in a variety of building materials.

This brick waterproof sealer is the emergency water repellent coating you CAN apply in wet weather. Stormseal will ensure you don’t have to wait for ideal dry conditions. It can seal damp and stone walls, no matter the weather conditions.

A professional, light weight, solvent resistant sprayer, ideal for small scale timber treatment, including small lofts. Compatible with Kingfisher aqueous products including KF-8 range and KF-18.

A professional, light weight, solvent resistant sprayer, ideal for small scale timber treatment, including small lofts. Compatible with Kingfisher aqueous products including KF-8 range and KF-18.

A high performance epoxy resin primer, ideal for sealing concrete surfaces. May be blinded with quartz sand (while tacky) to create an anti-slip surface finish. Kingfisher clear epoxy resin for concrete floors can also form a moisture proof membrane.

This revolutionary damp concrete floor sealer will stop damp from coming through the floor without the need for uplifting concrete. Forms a damp-proof membrane in as little as 2mm thickness! This damp proof floor paint provides an industrial grade wearable surface.

Used up to 2m below ground Tankit creates a fully bonded waterproof membrane once cured to the prepared surface. Tankit should be mixed with Kingfisher K-X11 bonding liquid.

An absolutely essential component of the Kingfisher tanking system, Anti-Sulphate (Ground Salt Neutraliser) must be applied wherever ground water has penetrated. This is because ground water contains sulphates and chlorides which degrade Tanking materials.

Primarily used to seal wall to floor joints as an integral part of our Tanking system. Barrier mortar is easy to use and highly effective.

A highly versatile, rot proof 5mm waterproofing membrane which can be used internally and externally, mesh finish is ideal for plasters and renders.

A 3mm stud waterproofing mesh membrane to use above ground. A mesh version is used where a plaster finish is desired, a clear for wall finishes of plaster board, steel profile dry lining frame or block wall.

Sealing Rope is used to form a seal at the overlap of adjacent sheets of membrane when neither a flange joint or stud in to stud hase been made. Sealing Rope is also used around protrusions through the membrane such as pipes.

Overtape is used to create single sided tape joints, as an over-tape to seal butted or overlapped joints and also to seal around protrusions through the membrane.

Kingfisher Damp Proof Paint (Damp Guard) can be applied to concrete, brick, renders and more, to help protect against water ingress. This damp proof membrane paint forms a damp guard liquid membrane and is quick drying.

The Kingfisher Liquid Damp Proof Membrane Paint helps Damp Storage Cellars and Garages/Outbuildings suffering from damp and condensation. If you have exposed brick or stone internal walls, this is a revolutionary hybrid damp proof paint.

Only use genuine "Kingfisher drywall renovating plaster" following chemical injection treatment for rising damp. Our salt retardant plaster beats standard "off-the-shelf" browning plasters because they cannot cope with the drying out process and frequently fail.

An absolutely essential component of the Kingfisher tanking system, Anti-Sulphate (Ground Salt Neutraliser) must be applied wherever ground water has penetrated. This is because ground water contains sulphates and chlorides which degrade Tanking materials.

Kingfisher Rendermix is formulated specifically for rendering after the DPC injection process. Incorporating a powerful fungicide, this waterproof cement additive stops further damaging fungal growth.