Checkout: £0.00
This breathable sealer stops the troublesome "dusting" typically associated with brick feature walls and decorative interior stone. Read More
Due to ADR regs on transport of flammables we can only send 25L drums of solvent product via premium rate special carrier, hence minimum FREE carriage order is 4 x 25L or ring for a quote. Alternatively, you can still collect single 25L drums at our Ulverston or Glasgow trade counters.
phone01229 869100
We would only use this to contact you to discuss your experience with our products.
Whether a country kitchen, red brick fireplace or an urban office conversion, brick feature walls are very aesthetically pleasing. Brick and stone features are very popular in modern-day. They soften the clean lines of modern interior design with organic warmth and authenticity.
This embracing the best of past and present has developed into a significant design movement. Kingfisher Interior Brick & Dust Sealer helps make the look practical and accessible to all budgets.
Kingfisher Building Products manufactures Interior Brick & Dust Sealer, a breathable (vapour permeable) surface treatment. It stops the troublesome dusting, typically linked with brick feature walls and decorative interior stone.
Older bricks, in particular, deposit red dust in their vicinity because heating dries out the clay surface. This encourages fine particles to lose adhesion and detach. Soft stone, cement and lime mortar joints are similarly vulnerable to abrasive dust release. This dust release can scratch furniture, ceramics and timber finishes.
Interior Brick & Dust Sealer offers a practical and lasting solution to the problem. Its penetrating, clear acrylic ester formula helps by binding and sealing porous or friable surfaces. It typically darkens the surface very slightly, often enhancing the substrate colour.
In most cases, one coat is sufficient for dust control. Although two coats can be applied for enhanced surface protection against liquid staining. Suitable as a feature wall and non-flammable fireplace sealer on most mineral-based substrates, including:
Formulated at our Lakeland factory, Kingfisher Interior Brick & Dust Sealer makes effective sealing of brickwork quick, clean and easy. Looking for an interior brick sealer to create a protective barrier? Look no further than our brick and dust sealer. Nothing compares for offering long-lasting protection against staining.
Sealing brick couldn’t be easier with our brick wall sealer. Our brick sealant is very popular when used to seal an interior brick fireplace as well as brick feature walls. It will penetrate deeply into brick and masonry, acting as a high-quality sealer for brick masonry. For more information regarding this product, don’t hesitate to contact us.
Two primary delivery options for smaller U.K MAINLAND orders (Typically under 100 Kg):
Standard 3-day service: £6.25 plus VAT (Note: Highlands Postcodes may be up to 5 working days)
Next Working Day*: £13.95 plus VAT (Not available to Highlands Postcodes)*Excludes weekends and public holidays
Cut-off time for “Next Working Day” orders to be processed is 12:00 noon. Once your goods have been despatched, you will normally receive a confirmatory e-mail with tracking details so that you can check the progress of your order. Details
It leaves a natural matt finish. Please note, this is one coat application. if you decide to apply more coats, there is chance the surface will dry darker.
One coat is sufficient to seal and dustproof the surface.
Yes this product is water-based. Therefore it is low odour, free of solvents & VOCs.
For a matt “anti-dusting” finish apply 1 coat by brush, roller or low pressure sprayer (not atomizer) on brick and porous stone or masonry joints. A second coat may be applied for a darker or “semisheen” finish if desired which will also increase protection against liquid staining.
This product stain proofs the wall and prevents dusting. It will allow water vapour transmission for breathability. To prevent moisture travelling through the wall from the outside apply Kingfisher Extreme Climate Next Generation Water Seal or Storm Seal to your exterior surfaces.
This sealer is not designed to colour enhance or alter the colour of stone or brickwork. We recommend testing the product on any surface before applying to the entire surface though.
Good product and did the job well with a lovely satisfactory finish. The delivery process was a bit extended with the company used being inefficient but the product is great and easy to apply.
Reviewed by Chris
Bought for a feature wall (stone) painted it on with a paint brush and absolutely crapped my pants at first, as when I put it on, as it looked like it had blue runs everywhere . But they completely vanished once dried. I was worried before using that I might get a sheen or it may darken the stone loads but looking at it now, it’s absolutely fantastic, completely mat and most importantly no dust. Would recommend this product to anyone looking for that natural look
Reviewed by Angelica Clifton
I've been always using for brickseal, it seals properly but most of all it leaves Matt, elegant finish
Reviewed by Jakub
Great
Reviewed by Paul Cooper
All fields marked with an * are required. If you are sending a photo, please allow time for the contact form to upload the photo. Please do not click refresh after clicking send until the form is submitted.
Kingfisher Extreme Climate is the ultimate high-performance brick sealer and masonry water seal for harsh environments. This professional-grade brickwork sealer is applied in just ONE COAT and provides 100% breathable surface protection for damp brick walls, sandstone, limestone, granite and more. As the UK's leading wall sealer, it uses the latest hydrophobic technology to offer unparalleled performance and versatility even in the most exposed locations.
Has your driveway seen better days? Block Star transforms old, brindle, red, grey & buff block paving from “faded & jaded” to a rich contemporary charcoal shade with a premium satin finish. Easy to apply, Block Star is a pigmented resin sealer NOT a paint, so it won’t peel.
Parabond 600
Kingfisher's Anti-Mould Kit provides everything you need to complete your project - Black Mould Remover – Mould Cure, Thermapaint – Anti-Mould Paint, Harris Taskmasters Mini Roller Set, Sponge, Disposable Gloves Pack of 4
Tired of scrubbing black mould every few weeks? Kingfisher's revolutionary Thermapaint anti-mould paint ends the endless cycle of cleaning, repainting, and repeating. This isn't just another mould-resistant paint; it's the permanent solution to your dampness and mould problems.
