Checkout: £0.00
10 Oct 2024
We’ve all been there. You spot the dreaded black mould creeping along the corners of your ceiling and your first instinct is to grab the nearest bottle of bleach and get scrubbing. But here’s the truth (and trust us, we know!): that’s one of the common mould mistakes many of us make. Instead of fixing the issue, you really just end up making things worse. Let’s look at some other pitfalls and, probably more importantly, how to break free from them.
1. Mistake: bleaching mould away
Bleach might seem like the ultimate solution, but it only tackles the surface. The mould beneath remains, ready to spread again once the conditions are right. It’s like sweeping dirt under the rug – it might be out of sight, but it’s definitely not gone.
Fix: Instead of bleach, you really need to get to the root of the problem. Mould thrives on moisture, so addressing condensation is key. Pre-treat any mouldy areas with Mould Cure, our fungicidal wash that not only cleans but stops the spores in their tracks. Then, apply our Thermapaint to break free from the cycle of clean-redecorate-repeat.
2. Mistake: ignoring ventilation
One of the most common mould mistakes is keeping windows closed all the time, especially in winter. Lack of airflow traps moisture, which mould absolutely loves. Ok so you want to keep your hour toasty and warm and it goes against your instincts to let all that lovely heat escape… BUT by keeping the windows shut tight all the time you’re creating the perfect environment for mould to flourish.
Fix: Make sure you open your windows regularly to let the air flow through. It’s one of the simplest ways to reduce moisture indoors. For persistent damp spots though, using our Thermapaint really helps. Its ceramic beads reduce condensation, cutting off mould’s moisture supply. At the same time the active fungicide neutralises the paint as a food source.
3. Mistake: simply painting over mould
We all know how frustrating it is when black mould reappears, often just weeks after a fresh coat of paint. You get stuck in the cycle of clean-redecorate-repeat… But did you know this is another common mould mistake? Painting over mould without proper treatment only seals in the problem and provides more food for it to thrive.
Fix: Break that cycle! Pre-treat the area with Mould Cure, then follow with Thermapaint. The unique blend of condensation-controlling and anti-mould chemistry means your walls stay mould-free for the long haul, unlike regular emulsion which encourages mould to return.
4. Mistake: not using the right products
Not all anti-mould paints are created equal. Some may mask the issue, but few of them truly prevent it from coming back into your life. Opting for a regular paint job without addressing the underlying condensation and nutrition source is a guaranteed way to see your nemesis black mould again.
Fix: We’ve said it before but we’ll say it again! Use Thermapaint Anti-Mould. Unlike regular emulsions, it combines microsphere technology with fungicidal control measures to combat both condensation and mould growth in one simple application. We know landlords and homeowners alike who swear by it for keeping mould at bay – and banishing it for good.
Break the cycle, beat the mould
By avoiding these common mould mistakes and using the our specially formulated products, you can finally say goodbye to the mould that’s been hanging around – for good. Simple tweaks to your routine and investing in the right solutions can make a world of difference – and your lungs will thank you too! Don't forget to follow us on Facebook for more tips and advice...
