PRODUCT DESCRIPTION
Professional Damp Proofing and Waterproofing Protection
Kingfisher DampGuard Liquid Membrane Paint is a versatile, solvent-free liquid damp proof membrane (DPM) designed to provide a flexible waterproof barrier against water penetration and moisture ingress.
Suitable for a wide range of internal and external applications, DampGuard forms a protective membrane over concrete, masonry, brickwork, stone, cement and plaster surfaces.
Its flexible formulation makes it particularly suitable for concrete floors, floor-to-wall junctions, walls and areas requiring additional waterproof protection.
Whether you are damp proofing a concrete floor, protecting a bathroom before tiling or waterproofing masonry, DampGuard offers a practical liquid-applied solution.
Key Benefits of DampGuard Liquid Membrane Paint
-
Waterproof Barrier: Creates a protective membrane to prevent the passage of water and moisture.
-
Flexible Membrane: Forms a flexible protective layer across the treated surface.
-
Damp Protection: Helps prevent moisture ingress through floors and walls.
-
Water and Salt Resistance: Designed to resist water and salts.
-
Solvent-Free: A solvent-free liquid DPM suitable for multiple applications.
-
Versatile Application: Suitable for concrete, masonry, plaster, walls and floors.
-
Easy to Apply: Can be applied using a brush or roller.
-
Internal and External Use: Suitable for damp proofing both interior and exterior walls.
Where Can DampGuard Be Used?
DampGuard Liquid Membrane Paint is suitable for a variety of damp proofing and waterproofing applications.
Concrete Floors and Walls
Creates a waterproof barrier over concrete surfaces, helping prevent moisture penetration. Particularly suitable for concrete floors and floor-to-wall junctions.
Brickwork, Stone and Masonry
Suitable for application to brick, stone and cement surfaces where a protective damp proof membrane is required.
Bathrooms, Wet Rooms and Tiling
Provides additional waterproof protection beneath tiling in bathrooms, wet rooms and other areas exposed to moisture.
Internal and External Walls
Can be used to damp proof internal and external walls, helping protect surfaces against moisture ingress.
Plastered Walls and Ceilings
Suitable for application to sound, properly prepared plaster surfaces requiring additional moisture protection.
Cavity Drain Membranes and Render Systems
Can be used as a waterproof layer behind cavity drain membranes or render.
Structural Timber Wall Sockets
Suitable for waterproofing wall sockets used for structural timbers.
Gas Barrier Applications
The product is described as providing a barrier against radon and methane gases.
Agricultural and Industrial Applications
Suitable for waterproofing applications involving bunds, sewage tanks and silage tanks.
How to Apply DampGuard Liquid Membrane Paint
Step 1 – Surface Preparation
Ensure the surface is clean, sound and free from dust, grease, loose materials and standing water.
Repair any cracks or holes before application. Concrete surfaces should be allowed to dry as much as possible.
Step 2 – Apply the First Coat
Using a brush or roller, apply the first coat of DampGuard evenly across the prepared surface.
Step 3 – Allow to Dry
Allow approximately 4 hours drying time before applying the second coat. Drying may take longer in colder conditions.
Step 4 – Apply the Second Coat
Apply a second coat to complete the waterproof membrane.
Step 5 – Allow to Dry Before Further Work
When using DampGuard on floors, allow the membrane to dry before applying a screed.
Coverage and Pack Size
DampGuard Liquid Membrane Paint provides approximately 5m² coverage per litre per coat.
A 10-litre container provides approximately:
-
50m² coverage for one coat
-
25m² coverage for two coats
Actual coverage will depend on the condition and absorbency of the surface.
Available Colours
DampGuard Liquid Membrane Paint is available in five colours:
-
White
-
Magnolia
-
Grey
-
Black
-
Blue
Pack Size: 10 Litres
Protect Your Surfaces with DampGuard
From damp proofing concrete floors and masonry to providing additional waterproof protection in bathrooms and wet rooms, Kingfisher DampGuard Liquid Membrane Paint delivers a flexible, solvent-free solution for a wide range of building and waterproofing applications.
DELIVERY CHARGES & TIMES
Two primary delivery options for smaller U.K MAINLAND orders (Typically under 100 Kg):
Standard 3-day service: £6.25 plus VAT (Note: Highlands Postcodes may be up to 5 working days)
Next Working Day*: £13.95 plus VAT (Not available to Highlands Postcodes)
*Excludes weekends and public holidays
Cut-off time for “Next Working Day” orders to be processed is 12:00 noon. Once your goods have been despatched, you will normally receive a confirmatory e-mail with tracking details so that you can check the progress of your order. Details
Frequently Asked Questions
Can I apply Liquid DPM Paint to damp concrete?
The surface should be clean, sound and free from standing water. The concrete should be allowed to dry as much as possible before applying DampGuard.
How many coats of Liquid DPM Paint are required?
Two coats are recommended. Apply using a brush or roller, allowing approximately four hours between coats. Drying times may be longer in colder conditions.
Can DampGuard Liquid Membrane Paint be used as a gas barrier?
DampGuard can be used as a barrier against radon and methane gases. For gas-protection projects, the complete system and installation should meet the relevant design requirements.
What can DampGuard Liquid Membrane Paint be used for?
DampGuard can be used on concrete floors, walls, brickwork, stone, cement and plaster. It is also suitable for floor-to-wall junctions, wet rooms, bathrooms and applications requiring additional waterproof protection.
What is Liquid DPM Paint?
Liquid DPM Paint is a liquid-applied damp proof membrane that creates a flexible waterproof barrier, helping prevent water and moisture from passing through treated surfaces.
Product Reviews
Add ReviewCurrently no reviews for this product. Be the first to review this product:
1. Product Description
DampGuard Liquid Membrane Paint is a flexible, solvent-free, liquid-applied damp proof membrane designed to form a waterproof barrier against water and moisture penetration. It is suitable for internal and external waterproofing applications on concrete, masonry and plaster surfaces.
2. Technical Information
|
Property |
Specification |
|---|---|
|
Product Name |
DampGuard Liquid Membrane Paint |
|
Manufacturer |
Kingfisher Building Products Ltd |
|
Product Type |
Liquid damp proof membrane (DPM) |
|
Formulation |
Solvent-free |
|
Membrane Properties |
Flexible, waterproof |
|
Application Method |
Brush or roller |
|
Number of Coats |
2 |
|
Coverage |
Approx. 5m²/litre/coat |
|
Coverage per 10L (2 coats) |
Approx. 25m² |
|
Intercoat Drying Time |
Approx. 4 hours |
|
Pack Size |
10 Litres |
|
Available Colours |
White, Magnolia, Grey, Black, Blue |
|
Application Areas |
Internal and external |
|
Suitable Substrates |
Brick, stone, cement, concrete and plaster |
|
Gas Barrier Claims |
Radon and methane |
3. Typical Applications
DampGuard Liquid Membrane Paint is suitable for:
-
Waterproofing concrete floors and walls
-
Damp proofing brickwork, stone and masonry
-
Moisture protection for plastered walls and ceilings
-
Additional waterproof protection beneath tiling in bathrooms and wet rooms
-
Damp proofing internal and external walls
-
Waterproof layers behind cavity drain membranes or render
-
Protection of structural timber wall sockets
-
Gas barrier applications against radon and methane
-
Waterproofing bunds, sewage tanks and silage tanks
4. Surface Preparation
All surfaces must be clean, sound and free from dust, grease, loose materials and standing water.
Any existing cracks or holes must be repaired before applying DampGuard.
Concrete surfaces should be allowed to dry as much as possible prior to application.
5. Application Instructions
Application Method: Brush or roller.
Number of Coats: Two coats.
Procedure:
-
Ensure the substrate has been prepared correctly.
-
Apply the first coat using a brush or roller.
-
Allow approximately 4 hours drying time.
-
Apply the second coat.
-
Allow the membrane to dry before subsequent floor screeding work.
Important: Drying times may be longer in colder conditions.
6. Coverage
The approximate coverage rate is 5m² per litre per coat.
|
Pack Size |
One Coat |
Two Coats |
|---|---|---|
|
10 Litres |
50m² |
25m² |
Coverage figures are theoretical calculations based on the manufacturer's stated application rate. Actual consumption may vary depending on surface conditions.
7. Performance Characteristics
Based on the manufacturer's product label, DampGuard offers the following characteristics:
-
Waterproof barrier
-
Resistance to water and salts
-
Protection against moisture ingress
-
Flexible membrane
-
Sealing of cracks and holes (subject to appropriate preparation and repair)
8. Manufacturer Information
Kingfisher Building Products Ltd
Bardsea, Nr Ulverston, Cumbria, LA12 9RA
Telephone: 01229 869100
Website: www.kingfisheruk.com
9. Additional Technical and Safety Information
The supplied product label does not specify the following information:
-
Minimum and maximum application temperatures
-
Full curing time
-
Shelf life and storage conditions
-
Density, viscosity and solids content
-
Required wet and dry film thickness
-
VOC content
-
Cleaning instructions
-
Specific test standards or gas permeability performance
-
Health and safety classifications
These details should be confirmed with the manufacturer before inclusion in a formal technical data sheet.





