Customers Also Purchased
Extreme Climate is the ultimate high performance masonry water seal for harsh environments. Applied in just ONE COAT it provides 100% breathable surface protection for damp brick walls, sandstone, limestone, granite and more. Using the latest hydrophobic technology it offers unparalleled performance and versatility even in the most exposed locations.
Interior Brick and Dust Sealer (Matt Finish)
Brick Sealant for Interior Brick Walls
- A breathable (vapour permeable) surface treatment
- Provides protection from staining
- Suitable as a non-flammable fireplace sealer
- Limits ingestion of dust by cooling fans in computers and other equipment
Whether a country kitchen, red brick fireplace or an urban office conversion, brick feature walls are very aesthetically pleasing. Brick and stone features are very popular in the modern-day. They soften the clean lines of modern interior design with organic warmth and authenticity.
This embracing the best of past and present has developed into a significant design movement. Kingfisher Interior Brick & Dust Sealer helps make the look practical and accessible to all budgets.
Kingfisher Building Products manufactures Interior Brick & Dust Sealer, a breathable (vapour permeable) surface treatment. It stops the troublesome dusting, typically linked with brick feature walls and decorative interior stone.
Older bricks in particular deposit red dust in their vicinity because heating dries out the clay surface. This encourages fine particles to lose adhesion and detach. Soft stone, cement and lime mortar joints are similarly vulnerable to abrasive dust release. This dust release can scratch furniture, ceramics and timber finishes.
Interior Brick Sealer
Interior Brick & Dust Sealer offers a practical and lasting solution to the problem. It’s penetrating clear acrylic ester formula helps by binding and sealing porous or friable surfaces. It typically darkens the surface very slightly, often enhancing the substrate colour.
In most cases, one coat is sufficient for dust control. Although, two coats can be applied for enhanced surface protection against liquid staining. Suitable as a feature wall and non-flammable fireplace sealer on most mineral-based substrates including:
- Clay Bricks
- Stone (Porous)
- Mortar Joints
- Breeze block (Two coats)
Formulated at our Lakeland factory, Kingfisher Interior Brick & Dust Sealer makes effective sealing of brickwork quick, clean and easy. Looking for an interior brick sealer to create a protective barrier? Look no further than our brick and dust sealer. Nothing compares for offering long-lasting protection against staining.
Sealing brick couldn’t be easier with our brick wall sealer. Our brick sealant is very popular when used sealing an interior brick fireplace as well as brick feature walls. It will penetrate deeply into brick and masonry, acting as a high-quality brick masonry sealer. For more information regarding this product, don’t hesitate to contact us.
Kingfisher “Interior Brick & Dust Sealer” is a very fi ne particle pure acrylic dispersion (solvent free), formulated to create an excellent penetrating and binding sealer. Being a water based acrylic it is a low odour material, suited to internal applications.
“Interior Brick & Dust Sealer” is designed to stop troublesome “dusting” typically associated with brick feature walls and decorative interior stone. Older bricks commonly deposit red dust in their vicinity because warm interior conditions dry out the clay surface, encouraging fine particles to lose adhesion and detach. These abrasive particles can damage floors, furniture and even computers. Soft stone and cement or lime mortar joints are similarly problematic. “Interior Brick & Stone Sealer” off ers a cost-eff ective and lasting solution to the problem by binding and sealing porous or friable surfaces with its penetrating clear acrylic ester formula.
2. Colour Enhancing
“Interior Brick & Dust Sealer” typically darkens the surface very slightly, often enhancing the substrate colour. In most cases one coat is suffi cient for dust control but two coats can be applied for enhanced surface protection against liquid staining. Suitable as a feature wall sealer on most mineral based substrates including:
• Clay bricks
• Stone (porous)
• Mortar Joints
3. Protection from staining.
Most common building materials (brick/ stone/ mortar / block) are mineral based and are therefore ultimately prone to moisture absorption. Fluids once absorbed into mineral substrates often leave particles behind which “stain” the surface. Two coats of “Interior Brick & Dust Sealer” helps to protect against this problem by sealing the surface to limit absorption.
PREPARATION & APPLICATION
In general it is very important that the surface to be treated is dry and any accumulated contaminants are thoroughly cleansed before application. As with all surface treatments you should apply to a small test area to check for compatibility before proceeding to full application. It is the user’s responsibility to establish suitability for the task in hand.
If the surface to be treated is merely dusty, then vacuum thoroughly until all traces of dust are removed and proceed directly to application. If there is ingrained dirt, wash with clean warm water and only resort to the use of soap detergents if gentle scrubbing with nylon bristle brush and warm water is ineff ective. Allow to dry out before proceeding to application.
For a matt “anti-dusting” finish apply 1 coat by brush, roller or low pressure sprayer (not atomizer) on brick and porous stone or masonry joints. A second coat may be applied for a darker or “semisheen” fi nish if desired which will also increase protection against liquid staining. Ideal for use on:
• Feature brick walls
• Hand-made bricks
• Friable stone walls
• Cement and lime mortar joints,
• Concrete worktops and much more…
Touch dry in 2 hours at 20OC.
Full cure 12 to 24 hours at 20OC
Dependent on the porosity of the surface 1 litre of product should cover approximately 4 to 6 m2 .
STORAGE / SHELF LIFE
• Store indoors in a cool dry place. Shelf life of Kingfi sher “Stone Sealer” is approximately 12 months from date of manufacture.
• DO NOT store at temperatures above 40OC.
• Protect from frost.
• Keep container tightly closed when not in use.
Tools and equipment should be cleaned with warm soap and water immediately after use. DO NOT allow to dry before cleaning.
HEALTH & SAFETY PRECAUTIONS
• Keep out of reach of children.
• In case of contact with eyes & skin rinse the aff ected areas immediately with plenty of water
• Always wear a respirator mask, eye protection and gloves
• Ensure that the area is well ventilated, especially if spraying
• If spraying use only manual pump sprayer with large droplet nozzle. DO NOT MIST
EU limit value for this product (cat.A/h): 30 g/l (2010) This product contains max. 1 g/l VOC.
Further Health and Safety information on this product is provided in the MSDS, copies of which are available from the Kingfi sher Technical Dept Tel. 01229 869100 or Fax 01229 869101. THE INFORMATION GIVEN IN THIS DATA SHEET RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALID FOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY PROCESS. SUCH INFORMATION IS TO THE BEST OF THE COMPANY’S KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS OF THE DATE INDICATED. HOWEVER NO WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR COMPLETENESS. IT IS THE USER’S RESPONSIBILITY TO SATISFY THEMSELVES AS TO THE SUITABILITY AND APPLICATION OF SUCH INFORMATION FOR THEIR OWN USE.
THE INFORMATION GIVEN IN THIS DATA SHEET RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED AND MAY NOT BE VALIDFOR SUCH MATERIAL USED IN COMBINATION WITH ANY OTHER MATERIALS OR IN ANY PROCESS. SUCH INFORMATION IS TO THE BEST OF THE COMPANY’S KNOWLEDGE AND BELIEF, ACCURATE AND RELIABLE AS OF THE DATE INDICATED. HOWEVER NO WARRANTY, GUARANTEE OR REPRESENTATION IS MADE AS TO ITS ACCURACY, RELIABILITY OR COMPLETENESS.IT IS THE USER’S RESPONSIBILITY TO SATISFY THEMSELVES AS TO THE SUITABILITY AND APPLICATION OF SUCH INFORMATION FOR THEIR OWN USE.
Every now and again you discover products that make you look much better DYI than you are. This product is one of them. Very easy to apply and results in last than two hours. Simply incredible. Look no further this is the real deal.
Reviewed by Leo
Easy to apply. Enhances appearance of both brick fireplace and stone fireplace and hearth. Nonflammable. Looks good. Plenty to give more coats. More coats seem to only improve the finish. I am delighted with it. Brush application, worth wearing a face mask, just to be extra cautious. Dries matt but you hardly notice it once dry.
Reviewed by Macaulay