Checkout: £0.00
Click to zoom
Our wall stabilising solution stabilises friable mortar, hardens surfaces which have "gone soft" due to weathering and allows you to paint straight after re-rendering or pointing in preparation for the application of "Weatherflex". Improves adhesion and depth of colour finish.Read More
Due to ADR regs on transport of flammables we can only send 25L drums of solvent product via premium rate special carrier, hence minimum FREE carriage order is 4 x 25L or ring for a quote. Alternatively, you can still collect single 25L drums at our Ulverston or Glasgow trade counters.
phone01229 869100
We would only use this to contact you to discuss your experience with our products.
Weatherflex Stabilising Solution is the ideal companion product to our Weatherflex masonry paint. It allows you to effectively stabilise or harden "less than perfect" walls or substrates in preparation for the application of Weatherflex. It also improves adhesion, depth of colour finish and often reduces the amount of paint applied.
Experiencing powdery or dusty walls? This wall stabilising solution ensures your exterior masonry surfaces are stable for paint to adhere. It is also perfect for reducing the absorbency of porous exterior surfaces. This product dries quickly and can cover a large surface, offering outstanding value for money.
Supplied ready to use for application by brush, roller or low-pressure sprayer. One coat of this wall stabilising solution is normally sufficient but very porous surfaces may require an additional application. Drying time depends on ambient temperature but generally 4 to 8 hours. Do not apply if air or surface temperature is below 8 ℃.
Two primary delivery options for smaller U.K MAINLAND orders (Typically under 100 Kg):
Standard 3-day service: £6.25 plus VAT (Note: Highlands Postcodes may be up to 5 working days)
Next Working Day*: £13.95 plus VAT (Not available to Highlands Postcodes)*Excludes weekends and public holidays
Cut-off time for “Next Working Day” orders to be processed is 12:00 noon. Once your goods have been despatched, you will normally receive a confirmatory e-mail with tracking details so that you can check the progress of your order. Details
Our weather battered walls needed some TLC prior to painting. This solution seems to have done the trick
Reviewed by Marn
Essential part of using with kingfisher paint do that
Reviewed by Duncan Robertson
Tested it on a small area and it exceeded my expectation, so very pleased to find this product and will use it again and happy to recommend it..
Reviewed by G Blair
Ordered on line fast delivery. I needed a breathable stabilizer as I was applying this to a 450 year old house exterior. I found product easy to apply with good coverage I used a 5 inch brush as surface very uneven. Product sealed all the surface very well . Then proceed to paint following day nice job done the customer was very pleased
Reviewed by David Hogan
Kingfisher “Weatherflex Stabilising Solution” is a solvent-free, fine particle, pure acrylic ester copolymer primer, sealer and stabiliser for masonry.
1. Stabilises and hardens “friable” masonry or masonry surfaces which may have “gone soft” due to extreme weathering.2. Binds and primes chalking surfaces liable to persistent “dusting”.3. Primes newly cement rendered surfaces so that they can be painted without delay.4. Stabilises flaky residues from previous coatings (except bitumen).5. Improves paint adhesion and depth of colour on porous surfaces including brick, stone and concrete.6. Improves adhesion to less porous surfaces including engineering brick and granite stonework.
• Easy to use – straight from the can.• Solvent free, non-hazardous formulation.• Allows painting of new render finishes and re-pointing repairs without alkaline contamination of the paint, which would otherwise delay painting by up to 2 months.• Produces a colourless, sealed, non dusting finish.• Tools can be cleaned with soap and water after use (no solvents required).
All substrates should be clean and free from laitance, dust, dirt and organic growth. Note: Where moss and mould are present these should be treated with Kingfisher “Bio wash - moss & mould”. The product may be applied to damp surfaces, but this will retard drying times and limit penetration, adhesion and durability. Supplied ready to use, the product can be applied by brush, roller or spray with a coverage rate of between 4 - 6 m² per litre depending on the porosity of the surface.
One coat should normally be sufficient but very porous surfaces may require additional coats. Drying time will vary depending on the ambient temperature, but normally 4 – 8 hours should be allowed for each coat to fully dry. For the best results allow surfaces to cure for a minimum of 24 hours before applying the Weatherflex Smooth Masonry Paint. DO NOT apply when air or surface temperatures are below 8 °C.
Weatherflex Smooth Masonry Paint
Kingfisher “Weatherflex Stabilising Solution” is available in 5 litre plastic containers. It should be stored in a cool, dry area, AVOID frost and direct sunlight. Shelf life of the product in, unopened sealed containers is 12 months.
Tools and equipment should be cleaned with warm soap and water immediately after use. Pump sprayers especially should be thoroughly flushed through with warm soapy water and then flushed with clean water until free of all residues. DO NOT allow to dry before cleaning.
• Wear gloves and overalls during application.• If applying by spray wear face mask.• Avoid contact with skin and eyes.• If contact occurs wash immediately with plenty of water.• Keep out of reach of children.• Ensure good ventilation during application and drying.
For further Health and Safety information on this product please refer to the Kingfisher Safety Data Sheet, copies of which are available from the Kingfisher Technical Dept. Tel. 01229 869100 or Fax 01229 868101.
All fields marked with an * are required. If you are sending a photo, please allow time for the contact form to upload the photo. Please do not click refresh after clicking send until the form is submitted.
Masonry paint engineered for extreme performance, Weatherflex Smooth delivers superior flexibility, durability and breathability. This premium exterior coating bridges cracks, repels water while allowing walls to breathe, and provides 15-year protection. Suitable for brick, stone, concrete and render. Water-based, non-toxic formula applies easily by brush, roller or spray for professional results.
Bio-Wash Moss Remover, is the maintenance professional’s choice for controlling troublesome moss growth on exterior hard surfaces like tarmac driveways, block pavers, sandstone paving slabs, concrete slabs, walls and much more.
Weatherflex Premium Masonry Paint provides superior waterproof protection for your home exterior. Covers brick, stone, render & pebbledash with a breathable, flexible coating that lasts 15 years. Available in 72 contemporary colours from our Lakes & Fells collection. Excellent coverage of 5-6m² per litre. Water-based, non-toxic formula that allows walls to breathe while keeping moisture out. Perfect for UK weather conditions. Next day delivery available. £37.02 inc. VAT.
This compact weed and moss sprayer is perfect for applying water based products including: Kingfisher "Biocidal Wash" and weed killers.
