Membranes

We supply both damp proofing membrane products and structural waterproofing membranes for routine damp proofing and major projects.

Waterproof your basement with our range of quality membrane products including; waterproof membranes, brick plugs and plaster membrane. Waterproof membranes are a simple and quick method of damp proofing properties. They isolate damp walls and salt contaminated walls without effecting your walls finish.

We understand that every project has its own specific challenges so we offer full technical support and backup by telephone and onsite. One of our team will be happy to discuss your requirements, just get in touch.

503 Membrane (Low Profile)
Overview:

Where space is at a premium and there is minimal risk of very high flows of water through the structure, the 3mm deep dimples offer a perfect combination of waterproofing and slim line design. Available with “mesh” for direct application of plaster finis

Size:
Qty:
Total:From £224.40£
508 Membrane (Multi Purpose)
Overview:

Made from tough 0.7mm gauge HDPE, the 508 range has an 8mm dimple profile which makes it perfect for internal waterproofing of retaining walls, without the need for extensive surface preparation. Rapid installation is possible using the “Multi-plug” as a

Size:
Qty:
Total:From £242.40£
Multi-Plug
Product Code:A1
Overview:

The multiplug is designed to achieve a firm fix in a variety of soft or otherwise imperfect surfaces and its integral rubber sealing grommet ensures that water cannot pass through the fixing. The multiplug doubles as a “rawl plug” accepting a 5mm screw,

Size:
Qty:
Total:£56.40£
Basedrain
Product Code:D1
Overview:

Clearly any moisture that gathers in the air gap behind the membrane will want to run down to floor level. To accommodate this, form a channel around the perimeter of the room, lay in pea gravel and bed the “Basedrain” into the pea gravel.

Size:
Qty:
Total:£172.80£
Double Sided Sealing Tape
Overview:

Doubled sided tape is used to form a seal at the overlap of the ajacent sheets of membrane. Double Side Tape is placed between the flange of one sheet and the top flat surface of the next, or if the studs interlock it can be used to seal between the flat

Size:
Qty:
Total:£50.40£
Sealing Rope
Product Code:A6
Overview:

Sealing Rope is used to form a seal at the overlap of adjacent sheets of membrane when neither a flange joint or stud in to stud hase been made. Sealing Rope is also used around protrusions through the membrane such as pipes.

Size:
Qty:
Total:£15.60£
Mesh Tape
Product Code:A25
Overview:

Mesh Tape is a self-adhesive butyl rubber sealing tape with a fleece finish which is used where a surface 'key' for plastering or rendering over is necessary. Used to join any of the meshed damp proofing membranes or below ground as an over tape where th

Size:
Qty:
Total:£32.10£
805 Membrane - Mesh
Product Code:M9
Overview:

A highly versatile, rot proof 5mm waterproofing membrane which can be used internally and externally, mesh finish is ideal for plasters and renders.

Size:
Qty:
Total:From £141.60£
803 Membrane (clear &  mesh)
Overview:

A 3mm stud waterproofing membrane use above ground. A mesh version is used where a plaster finish is desired, a clear for wall finishes of plaster board, steel profile dry lining frame or block wall.

Size:
Qty:
Total:From £86.95£
Mesh Membrane Plugs
Product Code:A16
Size:
Qty:
Total:£50.40£
Double Sided Sealing Tape
Overview:

Doubled sided tape is used to form a seal at the overlap of the ajacent sheets of membrane. Double Side Tape is placed between the flange of one sheet and the top flat surface of the next, or if the studs interlock it can be used to seal between the flat

Size:
Qty:
Total:£50.40£
Sealing Rope
Product Code:A6
Overview:

Sealing Rope is used to form a seal at the overlap of adjacent sheets of membrane when neither a flange joint or stud in to stud hase been made. Sealing Rope is also used around protrusions through the membrane such as pipes.

Size:
Qty:
Total:£15.60£
Overtape
Product Code:A7
Overview:

Overtape is used to create single sided tape joints, as an over-tape to seal butted or overlapped joints and also to seal around protrusions through the membrane.

Size:
Qty:
Total:£62.40£
Multi-Plug
Product Code:A1
Overview:

The multiplug is designed to achieve a firm fix in a variety of soft or otherwise imperfect surfaces and its integral rubber sealing grommet ensures that water cannot pass through the fixing. The multiplug doubles as a “rawl plug” accepting a 5mm screw,

Size:
Qty:
Total:£56.40£