Checkout: £0.00
Click to zoom
Please Note: Remember computer screens and printers do not interpret colour consistently. We recommend that you order a tester before making your final colour choice.
TOP-UP the sand joints & STOP WEEDS with our block paving filler. Unlike kiln dried joint sand Kingfisher Block Fill is a moisture curing grout which will not wash out and effectively inhibits weed growth.Read More
Due to ADR regs on transport of flammables we can only send 25L drums of solvent product via premium rate special carrier, hence minimum FREE carriage order is 4 x 25L or ring for a quote. Alternatively, you can still collect single 25L drums at our Ulverston or Glasgow trade counters.
phone01229 869100
We would only use this to contact you to discuss your experience with our products.
Unlike kiln dried sand, Kingfisher Block Paving Filler is a moisture curing grout which will not wash out. It also inhibits weed growth. Easy brush-in application to fill joints of 5mm or less for clean, dry block filled paving and patios.
Working on all types of block paving, this block paving filler is quicker than traditional methods and easy to use. Its effectiveness and durability are second to none. Simply add water to form tough elastic joints with exceptional adhesion.
Once it has cured, it will not wash away, reduce or crack over time. Even when pressure washing, it will stay strong. Using our block fill weed inhibiting sand will help you to strengthen and stabilize all types of block paving.
Fill the joints in block paving slabs to make the maintenance of block paving much easier. It will also enhance the appearance of your driveway or garden paved areas. If block paving joints are left un-filled, they could possibly sink because of water penetration and eventually become loose.
The end product of using our block paving filler will be a paving gap that is totally filled. That means that there is no need for kneeling and compressing the material. This treatment will last for many, many years, performing much better than traditional jointing methods.
Our expertise in developing joint stabilising products will give you peace of mind that the end product will be outstanding. We have a wealth of experience developing our jointing sand, which ensures a high-quality product. So, if you are looking for a block paving filler that will exceed expectations, look no further than Kingfisher.
Please note, this product must be used in conjunction with Kingfisher K-Seal Total or Kingfisher Restore-A-Drive for best results.
Two primary delivery options for smaller U.K MAINLAND orders (Typically under 100 Kg):
Standard 3-day service: £6.25 plus VAT (Note: Highlands Postcodes may be up to 5 working days)
Next Working Day*: £13.95 plus VAT (Not available to Highlands Postcodes)*Excludes weekends and public holidays
Cut-off time for “Next Working Day” orders to be processed is 12:00 noon. Once your goods have been despatched, you will normally receive a confirmatory e-mail with tracking details so that you can check the progress of your order. Details
Transformed my driveway.
Reviewed by Gavin Mahadeo
Pros: Better at stopping weeds than kiln dried sand with weed suppressant. Cons: More expensive and application time consuming. Found best way to avoid block staining was after sweeping to water the joints with a mini watering can then allow compound to dry and then jet wash blocks with a soft/medium jet wash setting. Initially followed the instructions and watered with a fine hose setting but the compound ran out of the joints and stained the blocks. Recommend try on a small area first and leave to dry to check block staining is OK.
Reviewed by Tony Barker
This stuff is amazing. It sets hard unlike the kiln dried sand you get and forms a tight seal against weeds and in our case ants. Tightens everything up and looks the business. Leaves a bit of a residue but imagine that will wash away after a while. Highly recommend this over kiln dried sand which washes out easily.
Reviewed by Chris p
Can seem expensive but 15kg goes a long way at 25mm deep and saves you from the usual 'pressure wash and re sand cycle'. Can leave a slight cement like film on the paving if you don't get the sprinkling of water just right but if you follow the instructions it turns into a grout and runs into the joints, just don't over water so it runs off the paving. A tip, on first opening the tub make the effort to mix the materials if you can see they have separated. All in all well worth it.
Reviewed by Cumbrian Dave
Kingfisher Responded
Thank you for your kind review and tip
All fields marked with an * are required. If you are sending a photo, please allow time for the contact form to upload the photo. Please do not click refresh after clicking send until the form is submitted.
Restore-A-Drive is the amazing, transformative block sealer that is saving Britain’s driveways! The original and best block paving resin with colour restorer. Conventional clear resins, only brighten faded backgrounds, Restore-A-Drive actually blends pigment back into the surface and is ideal for driveway restoration projects. Give new life to faded and jaded block pavers.
Bio-Wash Green Algae Remover is a concentrated cleaner designed to remove green algae, mould, and organic stains from external surfaces, such as patios, walls, and paving. Each 5L container treats up to 125m² and is perfect for restoring surface appearance or prepping for sealing or painting. It’s easy to apply using a brush or garden sprayer and works deeply to help prevent future growth.
