5L Garden Pressure Sprayer - Weed Killer Application  

5L Garden Pressure Sprayer | Professional Weed Killer Application

Garden Weed & Moss Control Challenges

Lawn Weed Spraying Coverage Requirements

Effective lawn weed control requires consistent pressure delivery across large areas to ensure even herbicide coverage. Inadequate pressure creates a patchy application, leading to weed survival and regrowth. Professional lawn sprayers must maintain steady pressure throughout the treatment cycle.

Moss Treatment on Hard Surfaces & Driveways

Moss and algae establish deep root systems in porous surfaces like concrete, tarmac, and paving stones. Successful moss removal requires sustained contact time with biocidal treatments, demanding sprayers that deliver controlled, targeted application without waste.

Water-Based vs Oil-Based Herbicide Application

Modern environmental regulations favour water-based herbicides and moss treatments. These formulations require sprayers with chemical-resistant seals and components that won't degrade when exposed to biocidal solutions and selective weed killers.

Pressure Consistency for Even Distribution

Inconsistent spray pressure leads to over-application in some areas and under-treatment in others. Professional weed control demands equipment that maintains steady pressure from first pump to final application, ensuring cost-effective chemical usage.

Hand Pump Sprayer Technology & Performance

Pump Action Pressure Generation System

This 5L garden pressure sprayer utilises manual pump action to create consistent working pressure for professional weed killer application. The pump mechanism builds pressure that's maintained throughout the spray cycle, eliminating the need for continuous pumping during treatment.

Pressure Release Safety Valve Operation

Integrated pressure release safety valve prevents over-pressurisation that could damage seals or create unsafe operating conditions. This safety feature automatically vents excess pressure while maintaining optimal spray performance for extended treatment sessions.

Trigger Lock Mechanism for Continuous Spraying

Professional trigger lock enables hands-free continuous spraying for large area treatments. Essential for extensive lawn weed control or moss treatment applications where operator fatigue would otherwise compromise application consistency.

5L Capacity vs Application Area Coverage

5-litre capacity provides an optimal balance between treatment area coverage and equipment portability. Sufficient volume for treating average residential gardens (typically 200-300m² coverage, depending on herbicide dilution rates) without excessive weight during application.

Professional Application System Features

Wide Funnel Opening for Spill-Free Filling

Wide-mouth funnel opening facilitates safe, spill-free filling with concentrated weed killers and biocidal solutions. Essential for precise measurement and mixing of herbicides like Kingfisher Biocidal Wash without contaminating surrounding areas.

Adjustable Nozzle Spray Pattern Control

Variable spray pattern nozzle adjusts from fine mist for moss treatment to wide fan spray for lawn weed control. Professional application requires pattern flexibility to match spray characteristics to treatment requirements and target areas.

Hose Length & Mobility for Large Gardens

Extended hose provides mobility for treating large gardens and hard-to-reach areas without repositioning the main tank. Critical for comprehensive weed spraying coverage around garden obstacles, under shrubs, and along fence lines.

Chemical Resistance & Cleaning Protocols

Chemical-resistant internal components withstand exposure to herbicides, moss treatments, and biocidal solutions. Easy-clean design prevents cross-contamination between different treatment products and extends equipment service life.

Compatible Products & Treatment Solutions

Recommended Applications:

• Kingfisher Biocidal Wash: Professional moss and algae treatment for hard surfaces
• Water-based selective herbicides: Lawn weed control without grass damage
• Non-selective herbicides: Total vegetation control for paths and driveways
• Moss prevention treatments: Preventive application on susceptible surfaces

Application Guidelines:

• Always read herbicide label instructions for correct dilution rates
• Test spray pattern on inconspicuous area before full treatment
• Clean sprayer thoroughly between different chemical applications
• Store with pressure released and tank empty

Technical Specifications & Capacity

Sprayer Specifications:

• Capacity: 5 litres (ideal for average residential gardens)
• Pump Type: Hand pump action with pressure accumulation
• Safety Features: Pressure release valve prevents over-pressurisation
• Spray Control: Adjustable nozzle with trigger lock mechanism
• Construction: Chemical-resistant materials suitable for herbicide application

Coverage Estimates:

• Spot treatment: 500-800m² coverage (concentrated application)
• Broad lawn treatment: 200-300m² coverage (standard dilution)
• Moss treatment: 150-200m² coverage (concentrated application)

Operating Instructions:

 

1. Fill through wide funnel opening with diluted treatment solution
2. Pump handle 15-20 strokes to build working pressure
3. Adjust nozzle for required spray pattern
4. Engage trigger lock for continuous application
5. Re-pump as required to maintain pressure

Two primary delivery options for smaller U.K MAINLAND orders (Typically under 100 Kg):

Standard 3-day service: £6.25 plus VAT (Note: Highlands Postcodes may be up to 5 working days)

Next Working Day*: £13.95 plus VAT (Not available to Highlands Postcodes)
*Excludes weekends and public holidays

Cut-off time for “Next Working Day” orders to be processed is 12:00 noon. Once your goods have been despatched, you will normally receive a confirmatory e-mail with tracking details so that you can check the progress of your order. Details

Optimal woodworm treatment timing depends on beetle lifecycle and environmental conditions:

Best Treatment Periods:

• March-May: Before adult emergence, targets overwintering larvae
• September-October: After egg-laying period, maximum larvae present
• Dry weather essential: minimum 48 hours without rain
• Temperature above 10°C for proper penetration

Avoid Treatment During:

• Adult flight period (June-August) when beetles emerging
• Winter months below 5°C - poor chemical penetration
• Humid conditions preventing proper drying
• Immediately after rain when timber moisture elevated

Application:

Kingfisher Professional Woodworm Treatment contains 0.5% Permethrin, penetrating 15mm into timber grain. Coverage: 4-5m² per litre on planed surfaces, 3m² on sawn timber. HSE-approved for structural use, effective against all UK wood-boring beetles. Apply by brush, spray, or injection depending on access. Retreatment typically unnecessary for 25+ years under normal conditions.

Effective weed control requires consistent pressure delivery and proper equipment, not just the chemical choice. Key requirements include:

Essential Sprayer Features:

• Sustained pressure throughout treatment cycle (prevents patchy application)
• Chemical-resistant seals for water-based herbicides
• Adjustable spray patterns for different target areas
• Adequate capacity to avoid frequent refilling

Professional Solution:

Kingfisher 5L Garden Pressure Sprayer delivers consistent working pressure via manual pump action system. Features include:

Coverage: 200-300m² for broad lawn treatment, 500-800m² for spot applications

Pressure Control: Integrated safety valve prevents over-pressurisation

Application Flexibility: Adjustable nozzle from fine mist to wide fan spray

Chemical Compatibility: Designed for water-based herbicides and Kingfisher Biocidal Wash

Ergonomic Design: Trigger lock for continuous hands-free spraying

Operating Protocol: Fill via wide funnel opening, pump 15-20 strokes to build pressure, adjust nozzle pattern, engage trigger lock. Chemical-resistant construction ensures reliable performance with selective and non-selective herbicides.

Pump frequency depends on spray pattern, nozzle setting, and treatment area size:

Typical Pumping Schedule:

• Initial setup: 15-20 pump strokes to build working pressure
• Fine mist applications: Re-pump every 2-3 minutes
• Wide fan spray: Re-pump every 1-2 minutes due to higher flow rate
• Spot treatment: 5-8 pump strokes maintains pressure longer

Kingfisher 5L Pressure Management:

Manual pump action system maintains consistent pressure throughout spray cycle. Integrated safety valve prevents over-pressurisation while optimising application efficiency. Trigger lock mechanism reduces operator fatigue during continuous treatments.

Maintenance Tips: Monitor pressure gauge if fitted, listen for reduced spray intensity, check nozzle pattern consistency. Store with pressure released and tank empty to extend seal life and prevent chemical residue buildup.

Proper cleaning prevents cross-contamination and extends sprayer life. Essential after each use, especially with biocidal treatments:

Immediate Post-Use Cleaning:

• Empty remaining solution completely through nozzle
• Fill with clean water, pump and spray through system
• Repeat water flush 2-3 times to remove chemical residue
• Remove nozzle and clean separately with brush

Deep Cleaning Protocol:

• Fill with dilute household detergent solution
• Pump and circulate for 2-3 minutes
• Spray through nozzle to clean internal passages
• Final rinse with clean water until no suds visible

Kingfisher 5L Design Benefits:

Wide funnel opening facilitates thorough cleaning access. Chemical-resistant seals and components prevent degradation from herbicide exposure. Easy-clean design prevents buildup in pump mechanism and trigger assembly.

Proper cleaning prevents cross-contamination and extends sprayer life. Essential after each use, especially with biocidal treatments:

Immediate Post-Use Cleaning:

• Empty remaining solution completely through nozzle
• Fill with clean water, pump and spray through system
• Repeat water flush 2-3 times to remove chemical residue
• Remove nozzle and clean separately with brush

Deep Cleaning Protocol:

• Fill with dilute household detergent solution
• Pump and circulate for 2-3 minutes
• Spray through nozzle to clean internal passages
• Final rinse with clean water until no suds visible

Kingfisher 5L Design Benefits:

Wide funnel opening facilitates thorough cleaning access. Chemical-resistant seals and components prevent degradation from herbicide exposure. Easy-clean design prevents buildup in pump mechanism and trigger assembly.

Moss on concrete driveways requires targeted treatment approach due to deep root penetration in porous surfaces:

Treatment Strategy:

• Apply during dry weather for maximum chemical contact time
• Use fine mist setting for even distribution on textured surfaces
• Allow 24-48 hours contact time before removing dead moss
• Brush away dead material to prevent reestablishment

Recommended Application:

Kingfisher 5L Garden Pressure Sprayer with Kingfisher Biocidal Wash provides controlled, targeted moss treatment. Adjustable nozzle delivers precise application from fine mist to wide coverage. Extended hose allows treatment of large driveway areas without repositioning tank.

Coverage Estimate: 150-200m² for concentrated moss treatment applications. **Prevention:** Apply diluted biocidal wash annually to prevent moss reestablishment. Focus on shaded, damp-prone areas where moss growth typically initiates. Clean gutters and improve drainage to reduce moisture sources.