Basement Waterproofing

Our waterproofing tanking products offer a range of structural waterproofing and damp proofing solutions for new and existing buildings.

Kingfishers tanking membrane products help to create dry environments which can then be effectively insulated to meet current building regulations. This tanking membrane can be used to speed up the drying out of flood-damaged properties during basement tanking. Our Aquatech membrane provides an excellent primary waterproofing system when used with a cavity drainage membrane.

Basement waterproofing is vital when a part of a property is built at ground level or below. This is because it’s likely that water will build up surrounding the basement, which could eventually lead to water penetration. Our basement tanking systems are can be used to treat damp walls by restricting water ingress. This will help to ensure the walls are permanently watertight.

Outstanding Basement Tanking Membranes

Damp in basement or cellar walls can be typical due to the walls being below the ground. Without basement tanking systems, water ingress can result in mould or even structural issues. That’s where we come in, supplying high-quality basement tanking membranes that will never fail to impress.

We have been supplying waterproofing products for many years and have a wealth of experience in the industry. Perfect for application in your basement or cellar, their waterproofing design will help stop the passage water.

If you are looking for a high-quality basement tanking membrane, look no further than Kingfisher Building Products. Our products are comprehensively tested to ensure quality and performance. The Kingfisher waterproof tanking membrane products are available online for delivery across the UK.

Aquatech Premium Tanking Slurry
Product Code:46
Rating:
starstarstarstarstar
52
Overview:

Kingfisher “Aquatech” is the ultimate brush applied tanking system for basements, earth retaining walls, underground garages, water tanks and more. Trusted by structural waterproofing professionals for over 20 yrs the “Aquatech” tanking system is popular

Size:
Qty:
Total:£64.21£75.54£
Anti-Sulphate (Ground Salt Neutraliser)
Overview:

An absolutely essential component of the Kingfisher tanking system, Anti-Sulphate must be applied wherever ground water has penetrated. This is because ground water contains sulphates and chlorides which degrade Tanking materials.

Size:
Qty:
Total:From £24.50£
Waterproofing Latex Admixture (K-X11)
Overview:

Kingfisher K-X11 Waterproof Admixture is a copolymer blend of latex and acrylics. When added to mortars K-X11 dramatically improves the characteristics of the mix, providing water resistance, adhesion, strength and flexibility renders...

Size:
Qty:
Total:From £35.72£
Barrier Mortar Floor Joint Sealer
Overview:

Primarily used to seal wall to floor joints as an integral part of our Tanking system. Barrier mortar is easy to use and highly effective.

Size:
Qty:
Total:£60.48£
Tank Plug - Water Plugging Compound
Product Code:49
Rating:
starstarstarstarstar
41
Overview:

Almost instantly plugs flowing water, which may be pouring through cracks in mortar, bricks or stonework. All it takes is a handful of tank plug mortar held in place over the affected area until set. Sets in 2 minutes.

Size:
Qty:
Total:From £28.20£
10 mm Mixing Paddle
Product Code:48P
Overview:

Ideal for mixing tanking slurry and renders. Use with electric drill with 10 mm chuck or larger. Size: 100 x 580mm, Hex shank (10mm) 500 to 700 rpm Max

Size:
Qty:
Total:£6.24£
503 Membrane (Low Profile)
Overview:

Where space is at a premium and there is minimal risk of very high flows of water through the structure, the 3mm deep dimples offer a perfect combination of waterproofing and slim line design. Available with “mesh” for direct application of plaster finis

Size:
Qty:
Total:£224.40£
508 Membrane (Multi Purpose)
Overview:

Made from tough 0.7mm gauge HDPE, the 508 range has an 8mm dimple profile which makes it perfect for internal waterproofing of retaining walls, without the need for extensive surface preparation. Rapid installation is possible using the “Multi-plug” as a

Size:
Qty:
Total:From £290.40£
Multi-Plug
Product Code:A1
Overview:

The multiplug is designed to achieve a firm fix in a variety of soft or otherwise imperfect surfaces and its integral rubber sealing grommet ensures that water cannot pass through the fixing. The multiplug doubles as a “rawl plug” accepting a 5mm screw,

Size:
Qty:
Total:£56.40£
Mesh Membrane Plugs
Product Code:A16
Size:
Qty:
Total:£50.40£
Sealing Rope
Product Code:A6
Overview:

Sealing Rope is used to form a seal at the overlap of adjacent sheets of membrane when neither a flange joint or stud in to stud hase been made. Sealing Rope is also used around protrusions through the membrane such as pipes.

Size:
Qty:
Total:£15.60£
Overtape
Product Code:A7
Overview:

Overtape is used to create single sided tape joints, as an over-tape to seal butted or overlapped joints and also to seal around protrusions through the membrane.

Size:
Qty:
Total:£62.40£
Mesh Tape
Product Code:A25
Overview:

Mesh Tape is a self-adhesive butyl rubber sealing tape with a fleece finish which is used where a surface 'key' for plastering or rendering over is necessary. Used to join any of the meshed damp proofing membranes or below ground as an over tape where th

Size:
Qty:
Total:£52.67£
Basedrain
Product Code:D1
Overview:

Clearly any moisture that gathers in the air gap behind the membrane will want to run down to floor level. To accommodate this, form a channel around the perimeter of the room, lay in pea gravel and bed the “Basedrain” into the pea gravel.

Size:
Qty:
Total:£172.80£
Damp Proof Paint (Damp Guard)
Product Code:63W5
Rating:
starstarstarstarstar
51
Overview:

Liquid Applied Radon Gas Barrier Membrane, Wet room paint, Liquid tanking membrane - ready to use: Cellars/Basements Pond painting & water tank lining Silage resistant Paint

Colour:
Size:
Qty:
Total:From £35.04£41.22£