Checkout: £0.00
Clearly any moisture that gathers in the air gap behind the membrane will want to run down to floor level. To accommodate this, form a channel around the perimeter of the room, lay in pea gravel and bed the “Basedrain” into the pea gravel. Read More
Colour may vary slightly from image
Due to ADR regs on transport of flammables we can only send 25L drums of solvent product via premium rate special carrier, hence minimum FREE carriage order is 4 x 25L or ring for a quote. Alternatively, you can still collect single 25L drums at our Ulverston or Glasgow trade counters.
phone01229 869100
We would only use this to contact you to discuss your experience with our products.
Clearly any moisture gathering in the air gap behind a wall membrane will want to run down to floor level, so why not use this behaviour to collect and remove the water by forming a channel around the perimeter of the room to accommodate this, laid in pea gravel and with the Base Drain bedded into the pea gravel. The Base Drain can then either feed into a sump to be pumped away (see photo) or if available, feed directly to an external drain.
Currently no reviews for this product. Be the first to review this product:
All fields marked with an * are required. If you are sending a photo, please allow time for the contact form to upload the photo. Please do not click refresh after clicking send until the form is submitted.
Made from tough 0.7mm gauge HDPE, the 508 range has an 8mm dimple profile which makes it perfect for internal waterproofing of retaining walls, without the need for extensive surface preparation. Rapid installation is possible using the “Multi-plug” as a
A 3mm stud waterproofing mesh membrane to use above ground. A mesh version is used where a plaster finish is desired, a clear for wall finishes of plaster board, steel profile dry lining frame or block wall.
A highly versatile, rot proof 5mm waterproofing membrane which can be used internally and externally, mesh finish is ideal for plasters and renders.
