‣ Developed specifically for the control of rising damp ‣ Everything you need to install an effective DPC ‣ Quick & easy to install ‣ Over 40% active ingredient ‣ No powered injection pump required
Where traditional pressure injection fluid cannot be used, Dri-Wall is the answer. An advanced, ready-to-use, chemical damp proofing formula which forms an effective moisture barrier within the wall.
The Kingfisher Dri-Wall Injection Kit comprises everything you need to install an effective chemical damp proof course and eliminate the root cause of rising damp.Chemical DPC Injection Kit Contains
‣ 8 x 380ml Dri-Wall Tubes ‣ 1 x Premium Sealant Gun ‣ 1 x Dri-Wall Nozzle ‣ 1 x 12mm x 260mm SDS drill bit ‣ 1 x 12mm x 160mm SDS drill bit ‣ 3 x Pairs of latex gloves
The 380ml Dri-Wall Injection Kit will treat:
‣ Up to 32m of wall at a depth of 4.5" (115mm) ‣ Up to 16m of wall at a depth of 9" (230mm)
I would definitely use Kingfisher again the service was 1st class, website was easy to use, delivery was prompt and the product (DPC cream) was excellent and good value for money.
Reviewed by Mark Smith on
Damp wall repair
Used this last summer to fix a damp problem in our front room which my mate, a plasterer said was rising damp. Job turned out a bit more involved than I thought but the kit had everything in except for plaster. we drilled the holes outside and injected the paste which is quite simple when you get the hang of it - we taped the drill bit at 7inches so as not to go right through the double brick. That is the easy bit we had to chisle damp plaster inside and skirtings were rotten also! Used their special Kingfisher plaster which again my mate recommended. Seems to have cured the damp so far so good!
Reviewed by Danny on