PRODUCT DESCRIPTION
Clear Stone Wall Sealer
- Invisibly protects interior decorative stone and brickwork
- Repels most water-soluble liquids
- Dries clear without leaving any sheen
Interior Stone Sealer provides an invisible stain barrier for interior decorative stone and brickwork. It doesn't darken fine decorative stone but provides excellent protection against liquid staining. Many resin-based sealers darken the material to which they are applied and this is not always decoratively desirable.
Our clear stone wall sealer, by contrast, is an advanced water-based fluoro-carbon which leaves no visible trace. It effectively repels liquids to protect the appearance of your stone surfaces without darkening. Liquids "bead up" on the surface and are not absorbed into the substrate, thus protecting your stone against staining. Suitable for interior sealing of:
- Flagstone floors
- Stone worktops
- Decorative stone features
- Stone fireplaces and hearths
- Slate (1 coat only)
Note: Interior Stone Sealer does not control "dusting", instead please refer to our Interior Brick & Dust Sealer.
DELIVERY CHARGES & TIMES
Two primary delivery options for smaller U.K MAINLAND orders (Typically under 100 Kg):
Standard 3-day service: £6.25 plus VAT (Note: Highlands Postcodes may be up to 5 working days)
Next Working Day*: £13.95 plus VAT (Not available to Highlands Postcodes)
*Excludes weekends and public holidays
Cut-off time for “Next Working Day” orders to be processed is 12:00 noon. Once your goods have been despatched, you will normally receive a confirmatory e-mail with tracking details so that you can check the progress of your order. Details
Product Reviews
Add ReviewDid the job
Bought two litres to cover our new slate tiles laid in our dining room, was looking for something which would seal but keep the original slate look without any shine and this product definitely did the job. Obviously slate is not very porous and the sealer went much further than stated. Gave it two coats and only just started to use the second container, room 3mx3m. Highly recommend
Reviewed by Robert Trivett
I used this product to treat a large interior wall which had been grit blasted and re-pointed using hydraulic lime morter as defined under Listed Buildings Planning Conditions. The extremely porous hand made local Cambridgeshire brick are approximately 180 years old and typically not of uniform size or colour. This feature is typical of Tower Windmills in the area and one which needed to be retained on conversion and restoration. I found that thorough preparation using wire brushes followed by vacuum cleaning was essential. The uneven surface prevented efficient application by roller or spray. I found that a three inch brush was about right working from a paint tray and brushing in all directions to ensure penetration into cracks and uneven morter. It was necessary to mask off decorated woodwork to avoid staining and a second coat was necessary. Hard work but excellent result.
Reviewed by Mr. M.J. Mason
Customers Also Purchased

Extreme Climate is the ultimate high performance masonry water seal for harsh environments. Applied in just ONE COAT it provides 100% breathable surface protection for damp brick walls, sandstone, limestone, granite and more. Using the latest hydrophobic technology it offers unparalleled performance and versatility even in the most exposed locations.






